| Overview | Process Diagram | On Site Photos | Spec Sheet |

Overview:

If you are still using a hot checker or other estimating equipment to determine moisture content, then you need AccuDry. Other technologies consistently underestimate moisture content. Our studies find that as much as 30% of the charge is under-dried. Can you afford 30% degrade. Why shut down the kiln to determine moisture content? AccuDry works continuously throughout the drying process. The kiln operator is provided continuous moisture measurements on a display.

You know exactly when to shut the kiln down. No more wasted energy. This technology was tested for several years in commercial softwood drying kilns. The AccuDry System has provided dry kiln operators with surprising insight into the drying process. Ultimately, the accuracy and repeatability of AccuDry has helped them improve lumber quality and mill throughput, reduce energy costs and most importantly, increase mill profits.

• Improve recovery up to 25%
• Inexpensive! AccuDry can pay for itself within a few months.
• Turn off the kiln only after you reach the desired M.C.   Get it right every time!
• No more measuring in the kiln. AccuDry displays measurements on a display in the on a display in the control facility.
• AccuDry can dry the charge to a fixed end point moisture content.
• AccuDry measures the full range of moisture content. Others can't!
• Re-condition wood correctly!  AccuDry measures the moisture content of each stack for the highest quality lumber.
• Readings are not affected by the presence of resin sapwood or concentration of growth rings.
• All readings continuously stored for convenient retrieval and quality assurance. Managers can download reports off-site.
• AccuDry provides consistently accurate reliable and repeatable results.

| Home |  Contact | Download |